The For Estroost
Meta to cut 10,000 jobs in second...
Elevating Your Office Attire...
Beauty and Wellness Secrets...
31°C, New York
The For Estroost

Weekly Updates

Let's join our newsletter!

Do not worry we don't spam!

The For Estroost

Making a Bee Hotel from Natural Materials

Why Solitary Bees Deserve a Place in Your Garden

Of the roughly 270 bee species recorded in Britain, only the honeybee and around two dozen bumblebees live in colonies. The rest — the mining bees, leafcutters, mason bees and their kin — are solitary. Each female works alone, provisioning her own nest cells with pollen and nectar, laying an egg in each, and sealing it up before moving on. They are quietly among the most effective pollinators in our gardens, orchards and hedgerows, and many are in decline.

Unlike honeybees, solitary bees do not build wax combs in a hive. Most nest in bare ground; a good number use hollow plant stems, old beetle borings in dead wood, or cracks in mortar. A bee hotel simply recreates those cavities in a tidy, weatherproof package. Made well and sited properly, it can support dozens of bees through a single season.

Choosing Natural Materials

The best hotels are built from materials you can gather or buy cheaply, and they avoid plastic tubes, which trap condensation and grow mould. Stick to these:

  • Hollow stems: cut canes of bamboo, Japanese knotweed (if you can source it responsibly) or thick-stemmed plants such as teasel, hogweed and elder. Ideally 6–10mm internal diameter for most garden species; a few wider ones up to 12mm suit larger leafcutters.
  • Drilled wood blocks: seasoned hardwood offcuts such as oak, ash or beech, drilled with clean holes of varied diameters between 4mm and 10mm. Depth should be around 10–15cm, with one open end only.
  • Logs with natural borings: any dead, dry, untreated timber with beetle holes already in it is prime real estate. Avoid wood that has been varnished or pressure-treated.
  • Frames and fixings: untreated timber battens, stainless or galvanised screws, and a small piece of slate, tile or marine ply for a roof.

Avoid glass, plastic drinking straws and anything sealed at both ends. Bees need a single entrance with a closed back — no tunnels, no dead ends they cannot reach.

How to Build a Simple Bee Hotel

The simplest design is a sturdy wooden box with an open front and a solid back, roughly 20cm wide, 30cm tall and 15cm deep. Cut the sides, top and base from 18mm untreated timber; screw them together rather than nailing, so it stays rigid through wet winters. Add a small overhanging roof that projects at least 5cm past the front to shed rain.

Now fill it. Bundle your hollow stems tightly into one half of the box, cut so they sit flush with the front and reach the back. Any gap between stems lets in light and parasites; wedge them with a strip of wood if needed. In the other half, screw in one or two drilled blocks, holes facing outwards. Stand the blocks so the grain runs horizontally — moisture runs along the grain, and a horizontal block drains better than a vertical one.

If you have a log with natural borings, drill a couple of extra holes into the end grain and stack it at the base of the box. Don't mix blocks and stems so tightly that air cannot move; a little ventilation between sections helps everything dry out after rain.

Where to Hang It

Placement matters more than most people realise. Solitary bees are cold-blooded and need warmth to fly, so mount the hotel on a wall, fence or shed that faces between south and south-east. It should catch full morning sun and stay warm into the afternoon, but not bake in a greenhouse-like position.

Height is typically 1–1.5 metres above ground, sheltered from prevailing wind and rain, and clear of vegetation that might screen the entrance. Avoid hanging it directly above a bird table or near a pond where frogs sit — both will happily pick off emerging bees. If the wall is very hot, a little afternoon shade is kinder to the developing larvae inside.

Maintenance Through the Year

A bee hotel is not a set-and-forget ornament. Left alone for years, tubes become clogged with old cocoons, pollen debris and mites, and the next generation struggles to emerge. Aim to refurbish once a year, ideally in late winter or early spring before the new season's bees appear.

  • Replace worn tubes: pull out spent stems and replace them with fresh cut canes. If you can, store the old ones in a cool shed in a mesh bag so any late-emerging bees can escape unharmed, then compost them.
  • Clean drilled blocks: brush out debris with a stiff bottle brush. If holes look blocked or stained, drill them out to the same depth, or simply retire the block.
  • Check fixings: tighten screws and re-seal any joints. Water ingress is the main killer of overwintering larvae.
  • Watch for parasites: small wasps, mites and the vivid ruby-tailed wasp are all part of the picture. Don't panic — a healthy hotel supports them too.

Keep the hotel up year-round. Many species overwinter as larvae inside the stems, and taking it down for "storage" often means losing them.

Making a Difference Beyond the Hotel

A bee hotel works best as one strand in a wider wildlife-friendly garden. Leave a sunny patch of bare ground unpuddled for mining bees, which nest in soil rather than stems. Allow a few dandelions, knapweeds and foxgloves to flower, and let plants such as comfrey, lungwort and borage fill the hungry gaps in early spring. Avoid insecticides entirely and think twice about tidying every dead stem in autumn — those hollows are next year's nesting sites.

Build it well, site it warmly, and keep it maintained, and a modest box of canes and drilled wood will repay you with bees working your fruit trees and flowers from March to September, season after season.

author
Sophie Mercer

The Forest Roost shares practical, down-to-earth guidance on british woodland wildlife, nature-friendly gardening and rural crafts for readers across the UK.

Leave A Comment
Handpicked